Sponsored Ads |
|
If this is your first visit, be sure to check out the FAQ by clicking the link above.
You may have to register before you can post: click the register link above to proceed.
To start viewing messages, select the forum that you want to visit from the selection below.
<<<<<< Register to remove these ads >>>>>>
|
|
08-21-2011, 11:24 AM
|
#1
|
Super Moderator
Join Date: Oct 2010
Age: 45
Posts: 6,570
|
Ooohhhh ahhhhhh
The creaking in my shocks got the best of me, so rather than wait til I had the $$$ for Bilsteins, I got some Monores from Advance. Used the P20 discount code and got 20% off of the set...so new shocks for $38 isn't bad at all in my opinion.
Gonna put them on later today.
|
|
|
|
08-21-2011, 11:29 AM
|
#2
|
Turbo Member
Join Date: Feb 2011
Location: Virginia/Philippines
Name: PI_greg
Posts: 1,370
|
Adam, I use gasmatic shocks and they have served me well for the last couple years.
|
__________________
PI_greg 2003 SXT-Hemi, SS/T rims, 275/60-17, AeroForce, w/wideband, 6.1 ignition, K&N-77 CAI, Fastman TB, eFan, 180 stat, TMR, HD OEM Trans Cooler, SC3865/PSC1, Dual window switch/ high idle mod, Edge, Crazy Spartan (112 lsa), 2800, DTT 4:10, TCI Floor Shifter, Shift lite, Pacesetter Ceramic LT's, Magna Spun Cats/SI/DO Muffler, Mcgaughys 2/4.5 spindle kit, Monroe shocks, Caltracs, Aeon springs bumps, SRT-10 gage pillar, air horn
|
|
|
08-21-2011, 11:37 AM
|
#3
|
Super Moderator
Join Date: Oct 2010
Age: 45
Posts: 6,570
|
Originally Posted by Redtruck-VA
Adam, I use gasmatic shocks and they have served me well for the last couple years.
|
Thats great to know Greg!!! Like I was telling Ken earlier, I would have like to have been able to get the Bilsteins, but since I don't tow anything worth beefing up my suspension for (well I have never towed anything with the truck as of yet) having Bilsteins would just be me having them to say I had them...lol...
But seriously, every time I hit a crack on the road, I can hear these Mopar shocks yes they are the stock shocks from 1996...they creak like a sumbitch and it's rather embarrassing.
|
|
|
|
08-21-2011, 11:44 AM
|
#4
|
Turbo Member
Join Date: Feb 2011
Location: Virginia/Philippines
Name: PI_greg
Posts: 1,370
|
My OEM shocks were bad in about 4-5 years. They didn't make any noises, but I had handling problems at speed. The truck had a funny squat going over bumps. Turned out my driver side rear shock was totally gone and that was causing the weird handling. You will like new shocks.
|
__________________
PI_greg 2003 SXT-Hemi, SS/T rims, 275/60-17, AeroForce, w/wideband, 6.1 ignition, K&N-77 CAI, Fastman TB, eFan, 180 stat, TMR, HD OEM Trans Cooler, SC3865/PSC1, Dual window switch/ high idle mod, Edge, Crazy Spartan (112 lsa), 2800, DTT 4:10, TCI Floor Shifter, Shift lite, Pacesetter Ceramic LT's, Magna Spun Cats/SI/DO Muffler, Mcgaughys 2/4.5 spindle kit, Monroe shocks, Caltracs, Aeon springs bumps, SRT-10 gage pillar, air horn
|
|
|
08-21-2011, 11:46 AM
|
#5
|
Super Moderator
Join Date: Nov 2010
Location: High Point, NC
Name: Paul
Age: 61
Posts: 2,639
|
You are going to love the new ride you get from the shocks. It is amazing how much of a difference new vs. old is. 15 years out of a pair of shocks ain't bad.
|
|
|
|
08-21-2011, 12:56 PM
|
#6
|
Viper Member
Join Date: Dec 2010
Name: Lee
Posts: 3,623
|
sweet!
|
|
|
|
08-21-2011, 06:59 PM
|
#7
|
Super Moderator
Join Date: Oct 2010
Age: 45
Posts: 6,570
|
Well, got the new shocks on, but I am sad to say the creak is still there. I know it's not a bushing, cause the whole front end has been greased, every bushing sprayed with penetrating oil to hopefully track it down.
My next guess is ball joints. It is even creaking when I turn the dan steering wheel...any suggestions?
|
|
|
|
08-21-2011, 07:05 PM
|
#8
|
Super Moderator
Join Date: Oct 2010
Age: 45
Posts: 6,570
|
Guys, I have never installed ball joints...is that something I can do with ease in my driveway? Also, the creak is in my drivers side, can I replace only that side or do I have to do both?
|
|
|
|
08-21-2011, 07:38 PM
|
#9
|
Viper Member
Join Date: Aug 2010
Age: 40
Posts: 3,962
|
I know my lower ball joints are rivet'd in which are going to need to be torched off...
|
|
|
|
08-21-2011, 07:49 PM
|
#10
|
Turbo Member
Join Date: Feb 2011
Location: Virginia/Philippines
Name: PI_greg
Posts: 1,370
|
usually BJ's are all changed out. Check them out and see if you can replace just the BJ's or do you have to change to whole control arm. If it is revited you can use a hand grinder to knock the heads off. Good luck..
|
__________________
PI_greg 2003 SXT-Hemi, SS/T rims, 275/60-17, AeroForce, w/wideband, 6.1 ignition, K&N-77 CAI, Fastman TB, eFan, 180 stat, TMR, HD OEM Trans Cooler, SC3865/PSC1, Dual window switch/ high idle mod, Edge, Crazy Spartan (112 lsa), 2800, DTT 4:10, TCI Floor Shifter, Shift lite, Pacesetter Ceramic LT's, Magna Spun Cats/SI/DO Muffler, Mcgaughys 2/4.5 spindle kit, Monroe shocks, Caltracs, Aeon springs bumps, SRT-10 gage pillar, air horn
|
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|