WORK IN PROGRESS
So Getting the Headlights Apart wasn't too bad. The first headlight was a bitch, but the second one was very easy.
The next step is to remove the bulb cover (that was a pain), and the 9006 Plate that was on the back. That came out with the removal of 3 screws.
On the Projectors there is an H1 adapter plated connected by 3 tiny screws, you have to remove those screws to take that off, then there is a big nut that screws the projector into place. Take that nut off, then fit the projector through the headlight, make sure to put the rubber washer (included) on the back of the projector, and tighten the nut down so it is very snug.
Then re-attach the H1 Adapter plate with the 3 screws. That is all it takes to put the projectors in!
Now the shrouds I ordered were too big for these headlights so I have to wait for the new ones to come in, hopefully Saturday. Ill finish this when they come in.