Sponsored Ads |
|
If this is your first visit, be sure to check out the FAQ by clicking the link above.
You may have to register before you can post: click the register link above to proceed.
To start viewing messages, select the forum that you want to visit from the selection below.
<<<<<< Register to remove these ads >>>>>>
|
|
04-19-2011, 05:20 PM
|
#1
|
Turbo Member
Join Date: Feb 2011
Location: Virginia/Philippines
Name: PI_greg
Posts: 1,370
|
LT install status
Ok, here's the status. I got a set of LT Pacesetter's used and finally cleaned-up the collectors as the pipes on the previous truck were just cut off. Something I noticed while I was removing the pieces of old pipe and the welds is the ceramic needs to ground off to make a good weld. Tapped the O2 bung holes. Got my OEM exhuast bolts all cut to proper lenght, OEM gaskets. Pacesetter 3" Y pipe. I'll take the cats (OEM 03 cats) to the machine shop tomorrow and cut the ends off of them to remove the choke points on either ends. I got a lift lined up this weekend and a helper. So this looks like I'm finally ready for the header install. OBTW, Red is running great and I am excited by what the headers might do. Springs and cam next week if all goes well. As a side note, if this all goes well and I don't get caught up trying to sort shit out, I'm going to drop her another inch all around. wish me luck...
Edit: I am following Ryans lead as he has a really good LT install and provided a ton of pictures. Thanks Ryan.
|
__________________
PI_greg 2003 SXT-Hemi, SS/T rims, 275/60-17, AeroForce, w/wideband, 6.1 ignition, K&N-77 CAI, Fastman TB, eFan, 180 stat, TMR, HD OEM Trans Cooler, SC3865/PSC1, Dual window switch/ high idle mod, Edge, Crazy Spartan (112 lsa), 2800, DTT 4:10, TCI Floor Shifter, Shift lite, Pacesetter Ceramic LT's, Magna Spun Cats/SI/DO Muffler, Mcgaughys 2/4.5 spindle kit, Monroe shocks, Caltracs, Aeon springs bumps, SRT-10 gage pillar, air horn
Last edited by Redtruck-VA; 04-19-2011 at 05:38 PM.
|
|
|
04-19-2011, 05:52 PM
|
#2
|
R/T Member
Join Date: Aug 2010
Name: Nick
Age: 34
Posts: 983
|
Goodluck its pretty straight forward. One advise. Disconnect the battery lol
|
__________________
The Legend Returns
|
|
|
04-19-2011, 05:56 PM
|
#3
|
Turbo Member
Join Date: Feb 2011
Location: Virginia/Philippines
Name: PI_greg
Posts: 1,370
|
Originally Posted by Silverbullet08
Goodluck its pretty straight forward. One advise. Disconnect the battery lol
|
Oh yes, i don't like surprises or the smell of burning wire....
|
__________________
PI_greg 2003 SXT-Hemi, SS/T rims, 275/60-17, AeroForce, w/wideband, 6.1 ignition, K&N-77 CAI, Fastman TB, eFan, 180 stat, TMR, HD OEM Trans Cooler, SC3865/PSC1, Dual window switch/ high idle mod, Edge, Crazy Spartan (112 lsa), 2800, DTT 4:10, TCI Floor Shifter, Shift lite, Pacesetter Ceramic LT's, Magna Spun Cats/SI/DO Muffler, Mcgaughys 2/4.5 spindle kit, Monroe shocks, Caltracs, Aeon springs bumps, SRT-10 gage pillar, air horn
|
|
|
04-19-2011, 07:15 PM
|
#4
|
Banned
Join Date: Feb 2011
Age: 47
Posts: 494
|
LT's aren't bad to install at all. And with a lift you should be golden.
|
|
|
|
04-19-2011, 07:35 PM
|
#5
|
Turbo Member
Join Date: Feb 2011
Location: Virginia/Philippines
Name: PI_greg
Posts: 1,370
|
That's what I am hoping for, I really don't want to struggle with it on the ground.
|
__________________
PI_greg 2003 SXT-Hemi, SS/T rims, 275/60-17, AeroForce, w/wideband, 6.1 ignition, K&N-77 CAI, Fastman TB, eFan, 180 stat, TMR, HD OEM Trans Cooler, SC3865/PSC1, Dual window switch/ high idle mod, Edge, Crazy Spartan (112 lsa), 2800, DTT 4:10, TCI Floor Shifter, Shift lite, Pacesetter Ceramic LT's, Magna Spun Cats/SI/DO Muffler, Mcgaughys 2/4.5 spindle kit, Monroe shocks, Caltracs, Aeon springs bumps, SRT-10 gage pillar, air horn
|
|
|
04-19-2011, 08:08 PM
|
#6
|
Vertically Challenged Super Mod
Join Date: Oct 2010
Location: Collinsville, OK
Name: Michael
Age: 44
Posts: 2,700
|
good luck greg.
|
|
|
|
04-19-2011, 08:20 PM
|
#7
|
Turbo Member
Join Date: Feb 2011
Location: Virginia/Philippines
Name: PI_greg
Posts: 1,370
|
I appreciate the support, I feel it will be a easy install. I just got to get my fat ass under the truck to get it done.
Thanks,
|
__________________
PI_greg 2003 SXT-Hemi, SS/T rims, 275/60-17, AeroForce, w/wideband, 6.1 ignition, K&N-77 CAI, Fastman TB, eFan, 180 stat, TMR, HD OEM Trans Cooler, SC3865/PSC1, Dual window switch/ high idle mod, Edge, Crazy Spartan (112 lsa), 2800, DTT 4:10, TCI Floor Shifter, Shift lite, Pacesetter Ceramic LT's, Magna Spun Cats/SI/DO Muffler, Mcgaughys 2/4.5 spindle kit, Monroe shocks, Caltracs, Aeon springs bumps, SRT-10 gage pillar, air horn
|
|
|
04-19-2011, 08:21 PM
|
#8
|
Banned
Join Date: Feb 2011
Age: 47
Posts: 494
|
Originally Posted by Redtruck-VA
That's what I am hoping for, I really don't want to struggle with it on the ground.
|
Been there with the ground install, outdoors in January. Not fun.
|
|
|
|
04-19-2011, 08:26 PM
|
#9
|
Turbo Member
Join Date: Feb 2011
Location: Virginia/Philippines
Name: PI_greg
Posts: 1,370
|
Originally Posted by ORT
Been there with the ground install, outdoors in January. Not fun.
|
Oh, in my younger years it didn't so much bother me. But I've become slow and lazy. But it'll be done this weekend and I stop complaining... lol
|
__________________
PI_greg 2003 SXT-Hemi, SS/T rims, 275/60-17, AeroForce, w/wideband, 6.1 ignition, K&N-77 CAI, Fastman TB, eFan, 180 stat, TMR, HD OEM Trans Cooler, SC3865/PSC1, Dual window switch/ high idle mod, Edge, Crazy Spartan (112 lsa), 2800, DTT 4:10, TCI Floor Shifter, Shift lite, Pacesetter Ceramic LT's, Magna Spun Cats/SI/DO Muffler, Mcgaughys 2/4.5 spindle kit, Monroe shocks, Caltracs, Aeon springs bumps, SRT-10 gage pillar, air horn
|
|
|
04-20-2011, 03:25 PM
|
#10
|
Turbo Member
Join Date: Feb 2011
Location: Virginia/Philippines
Name: PI_greg
Posts: 1,370
|
Got the OEM cats all cut and cleaned, everything is a go as of now. I'll pull the fender liners at the house on Friday. Now I'm excited....
|
__________________
PI_greg 2003 SXT-Hemi, SS/T rims, 275/60-17, AeroForce, w/wideband, 6.1 ignition, K&N-77 CAI, Fastman TB, eFan, 180 stat, TMR, HD OEM Trans Cooler, SC3865/PSC1, Dual window switch/ high idle mod, Edge, Crazy Spartan (112 lsa), 2800, DTT 4:10, TCI Floor Shifter, Shift lite, Pacesetter Ceramic LT's, Magna Spun Cats/SI/DO Muffler, Mcgaughys 2/4.5 spindle kit, Monroe shocks, Caltracs, Aeon springs bumps, SRT-10 gage pillar, air horn
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|